Adding a special sound-to-IR converter then turns those sounds back to IR and allows you to use your iPod as a remote control. We're going to use the Pocket PC software to input the IR signals from our remotes, and then we're going to use the sound to IR converter on our iPod later. When you're done, click Enter without typing anything in the box. We're using SoundForge for our example. To transmit from the iPod, again, you're likely able to take a pair of headphones, slice the ear buds off and splice in an IR transceiver, here's one from RadioShack that we think would work out. It won't let you create a new blank config. It's worth noting that this will work on other devices that can play sound, for kicks we put the wav files on our Mac, PC, linux box and were able to use those as a remote as well. Advanced topics Go to the playlist, point the iPod and the TV and if you've done everything right, you can now control your TV, or anything else for that matter with your iPod.
[PC] IR Converter Audacity Plugin SamyGO
A guide on how to use it: A Multi-Protocol Infrared Remote Library for the here: An Arduino universal remote: record and playback IR signals. WinLIRC allows you to transmit and receive standard infrared remote control signals. This allows you to control your computer using almost any standard.
Video: Recording ir signals using a pc System Engineering Copy Infrared signal
An Arduino universal remote: record and playback IR signals To use the universal remote, simply point your remote control at the IR module I copied the HEX codes read from the remote, then converted to DEC via windows calulator.
We did this a long long time ago, for another "hack" so we're sure it'll work out.
Breadboards just aren't good enough for us, we had to pull out the soldering iron.
We're using SoundForge for our example. Sometimes, you look around at all these gadgets and in a rare moment of inspiration or madness, you look at them all a little different???
This records the IR signal. Once you verify that it's working, it's now time to get that IR signal off the Pocket PC and on to a computer as a sound file.
I'm here to share with you a simple nyquist plugin for audacity that I wrote to automagically convert a recorded IR signal into a playable one. How-To: IR Remote Control your Computer to work with WinLirc or LIRC; it can transmit and recieve IR signals, Using WinLIRC (which is getting kind of old at this point) we easily recorded commands from our remote and.
You'll need to aim the transmitter at whatever you want it to talk to.
HowTo Turn your iPod in to a Universal Infrared Remote Control
We entered in a few dozen signals from 5 or so remotes and it's been working out great. Point a remote at the receiver. We hear that the RadioShack IR receiver we used has been known to produce flaky data, but ours worked fine.
Maisel' gas promo. Log in.
Recording ir signals using a pc
|When asked for a name, enter something like Power and click enter.
Here's our Serial connector with USB connector to supply a solid 5 volts to the transceiver. If you see codes, it's working! Discord introduces a better way to organize servers. Maisel' gas promo.
Video: Recording ir signals using a pc Using IR Signals to Control TV